Ovation Guitar Repair London


This Ovation LX was in serious trouble when its bridge lifted off.

It is only a couple of years old and was shipped over from Germany. It had had intensive repair in the past and the bridge had been refitted (twice) by guitar techs in Germany.


Normally when gluing a bridge in place, bridge clamps are used.
The bridge clamps reach into the guitar’s sound-hole and firmly locate on the internal bridge plate

Example

Since the Ovation LX does not have a sound-hole in the traditional sense, a different gluing method must be used.


It was decided that the bridge should be glued back in place using very strong wood glue and also bolted down through its wings. This would ensure that the wings of the bridge are tightly clamped whilst the glue was drying. The heads of the bolts would be covered with 6mm Mother of Pearl dot inlays to disguise their heads (a common solution).

When gluing a bridge to its soundboard appropriate down-baring from the clamps to the bridge is vital if it is to remain permanently stuck. I suspect that this was not the case with the past two attempts.
I decided to use a purpose made bar clamp. This clamp is used to “sandwich” the bridge, soundboard and back together. Care must be taken that the soundboard and the back of the guitar is not deformed in any way when using his clamp. To eliminate this, dowel posts were made and used to support and oppose the downward baring of the bar clamp on the soundboard and distortional forces on the back.
Also just as added insurance a cam clamp was used. The pre-amp of an Ovation is set into its side. This entire system was removed thus creating an opening in the side where the cam clamp can be inserted and used to reach the bridge and bridge-plate.

The soundboard and bridge were cleaned up. On the underside of the bridge ply-wood patches were inlayed to stiffen up this area and prevent the bolts from pulling through the bottom of the bridge.

The glue was applied and left to set for 12 hours.


The Bar and Cam Clamp in use

Dowel Posts for support

Bolts through the Bridge Plate viewed from the inside

Portal on the back

The guitar was strung up with 12 – 54 strings and tested for several days.


More about bridges here


Advertisements

7 Responses to “Ovation Guitar Repair London”

  1. Dave Nicklin Says:

    Top class work mate.

  2. Graham Parker Luthier Says:

    Thanks Dave, all in a day’s work.
    I’m guessing that during manufacture Ovation glue the bridge to the soundboard before they are attached to the body on the LX (?) discuss.

  3. Affordably priced 12 strings - My Les Paul Forums Says:

    […] Re: Affordably priced 12 strings With a little under 3 minutes online invested in a google search….these links will give you the typical 12 string Ovation story. Pics below are typical Ovation bridge issues that I've seen a hundred times easily. Some probably do stay in place though. All companies make guitars that break. Ovation 6758t | Ovation 6758T Elite T Series 12 String Acoustic Electric Guitar (Black) Reviews – Buzzillions.com Ovation Guitar: how to reattach top? Ovation Guitar Repair London Graham Parker Luthier […]

  4. John O'Connell Says:

    I have two ovation folklore guitars. The pick up on one is fine and the other is spectalular. I’ve had both for 25 years and just recently the one that is spectalular the tone changed completely and now sounds like a regular cheap pick up. I’m absolutely devastated. Can you think of a reason why this may have happened? Or any suggestions in terms of repairs?

  5. Graham Parker Luthier Says:

    Hi John,
    It’s probably best to call me on the workshop number to discuss the possible issues.

  6. bill whittaker Says:

    hi , I’ve got an old ovation matrix 1132-4 with the metal neck . The frets are worn and need replacing . Is it possible to do this repair on this model or does it require a new neck ?.

  7. Graham Parker Luthier Says:

    I believe that the frets on this neck, on this particular model , are all part of the fingerboard. Therefore any re-fret is impossible.
    Talk to Ovation (Fender UK) via your local music shop as to the likelihood of acquiring a replacement neck.
    Good luck.
    Graham


Leave a Reply

Fill in your details below or click an icon to log in:

WordPress.com Logo

You are commenting using your WordPress.com account. Log Out / Change )

Twitter picture

You are commenting using your Twitter account. Log Out / Change )

Facebook photo

You are commenting using your Facebook account. Log Out / Change )

Google+ photo

You are commenting using your Google+ account. Log Out / Change )

Connecting to %s

%d bloggers like this: